防天天中彩票为什么买不了世界杯国家标准及资料

2015年05月19日

防天天中彩票为什么买不了世界杯国家标准及资料

一、国家标准(GB,GB/T,GBJ)

 GBJ 79-1985           工业企业通信接地设计规范

 GB 6951-1986           轻质油品装油安全油面电位值

 GB/T 6833.3-1987         电子测量仪器电磁兼容性试验规范天天中彩票为什么买不了世界杯放电敏感度试验

 GB/T 11210-1989         硫化橡胶抗天天中彩票为什么买不了世界杯和导电制品电阻的测定

 GB 12014-1989          防天天中彩票为什么买不了世界杯工作服

 GB/T 1410-1989          固体电工绝缘材料体积电阻率及表面电阻率试验方法

 GB 12158-1990          防止天天中彩票为什么买不了世界杯事故通用导则

 GB/T 12582-1990         液态烃类电导率测定方法 ( 精密天天中彩票为什么买不了世界杯计法 )

 GB/T 12703-1991         纺织品天天中彩票为什么买不了世界杯测试方法

 GB 13348-1992          液体石油产品天天中彩票为什么买不了世界杯安全规程

 GB/T 14288-1993         可燃气体与易燃液体蒸气最小天天中彩票为什么买不了世界杯点火能测定方法

 GB/T 50174-1993         计算机机房设计规范

 GB 4385-1995           防天天中彩票为什么买不了世界杯鞋、导电鞋技术要求

 GB/T 15463-1995         天天中彩票为什么买不了世界杯安全名词术语

 GB/T 6539-1997          航空燃料与馏分燃料电导率测定法

 GB/T 2439-2001          硫化橡胶或热塑性橡胶导电性能和耗散性能电阻率的测定

 GB/T 2887-2000          电子计算机场地通用规范

 GB 6950-2001           轻质油品安全静止电导率

 GB 4655-2003           橡胶工业天天中彩票为什么买不了世界杯安全规程

二、国家军用标准(GJB)

 GJB/Z 25-1991          电子设备和设施的接地、搭接和屏蔽设计指南

 GJB 1649-1993          电子产品防天天中彩票为什么买不了世界杯放电控制大纲

 GJB 2527-1995          弹药防天天中彩票为什么买不了世界杯要求

 GJB 2605-1996          柔性热密封防天天中彩票为什么买不了世界杯阻隔材料规范

 GJB 3007-1997          防天天中彩票为什么买不了世界杯工作区技术要求

 GJB/Z 86-1997          天天中彩票为什么买不了世界杯放电防护包装手册

 GJB/Z 105-1998         电子产品防天天中彩票为什么买不了世界杯放电控制手册

三、电子行业标准(SJ,SJ/T)

 SJ/T 10147-1991         集成电路防天天中彩票为什么买不了世界杯包装管

 SJ 20154-1992          信息技术设备天天中彩票为什么买不了世界杯放电敏感度试验

 SJ/T 10533-1994         电子设备制造防天天中彩票为什么买不了世界杯技术要求

 SJ/T 10630-1995         电子元器件制造防天天中彩票为什么买不了世界杯技术要求

 SJ/T 10694-1996         电子产品制造防天天中彩票为什么买不了世界杯系统测试方法

 SJ/T 11159-1998         地板覆盖层和装配地板天天中彩票为什么买不了世界杯性能的试验方法

 

国外天天中彩票为什么买不了世界杯相关标准 ESD standards

ESD S1.1:1998—Evaluation, acceptance, and functional
testing of wrist straps.
 

ESD STM2.1:1997
—Resistance
test method for electrostatic discharge protective garments.
 

ESD STM3.1:2000
—Ionization. 

ESD SP3.3:2000
—Periodic
verification of air ionizers.
 

ESD S4.1:1997
—Worksurfaces—Resistance measurements. 

ESD STM4.2:1998
—Worksurfaces—Charge dissipation characteristics. 

ANSI/ESD STM5.1:2001
—Electrostatic
discharge sensitivity testing—Human body model.
 

ANSI/ESD STM5.2:1999
—Electrostatic
discharge sensitivity testing—Machine model.
 

ANSI/ESD STM5.3.1:1999
—Charged
device model (CDM)—Component level.
 

ESD S6.1:1999
—Grounding—Recommended practice. 

ANSI ESD S7.1:1994
—Floor
materials—Resistive characterization of materials.
 

ANSI ESD S8.1:1993
—ESD
awareness symbols.
 

ESD S9.1:1995
—Resistive
characterization of footwear.
 

ESD SP10.1:2000
—Automated
handling equipment.
 

ANSI ESD S11.11:1993
—Surface
resistance measurement of static dissipative planar materials.
 

ESD STM11.12:2000
—Volume
resistance measurement of static dissipative planar materials.
 

ANSI ESD S11.31:1994
—Evaluating
the performance of electrostatic discharge shielding bags.
 

ESD STM12.1:1997
—Seating-resistive
characterization.
 

ESD STM13.1:2000
—Electrical
soldering/desoldering hand tools.
 

ANSI ESD S20.20:1999
—Standard
for the development of an ESD control program.
 

ESD STM97.1:1999
—Floor
materials and footwear—Resistance in combination with a
person.
 

ESD STM97.2:1999
—Floor
materials and footwear voltage measurement in combination with a person.
 

AFLCR 65-8:1998
—Maintenance—Engineering and supply: Electrostatic discharge (ESD) control
program.
 

ANSI C63.14:1998
—American
national standard dictionary for technologies of electromagnetic compatibility
(EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)—Dictionary of EMC/EMP/ESD terms and definitions.
 

ANSI C63.16:1993
—American
national standard guide for electrostatic discharge test methodologies and
criteria for electronic equipment.
 

ANSI N322:1997
—American
national standard inspection, test, construction, and performance requirements
for direct reading electrostatic/electroscope–type
dosimeters.
 

ANSI T1.308:1996
—Central
office equipment—Electrostatic discharge immunity
requirements.
 

ASQ P672:1996
—Auditing
ESD and cleanroom processes.
 

ASTM D257-78
—Standard
test methods for dc resistance or conductance of insulating materials.
 

ASTM D991-83
—Standard
test method for rubber properties—Volume resistivity of
electrically conductive and antistatic products.
 

ASTM D5077-90:1997
—Standard
terminology relating to electrostatic discharge (ESD) packaging materials.
 

ASTM E1549-95:2000
—Standard
specification for ESD-controlled garments required in cleanrooms and controlled
environments for spacecraft for nonhazardous and hazardous operations.
 

ASTM F150-98
—Standard
test method for electrical resistance of conductive and static dissipative
resilient flooring.
 

ASTM F1812-97a
—Standard
test method for determining the effectiveness of membrane switch ESD shielding.
 

Bellcore GR-1421-CORE:1995
—Generic
requirements for ESD-protective circuit packet containers.

BS 6654:1985—Method for determination of the electrical
resistivity of textile floor coverings.
 

BS EN 100015-2:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for low-humidity conditions.
 

BS EN 100015-3:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for cleanroom areas.
 

BS EN 100015-4:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for high-voltage environments.
 

BS EN 1149-1:1996
—Protective
clothing—Electrostatic properties—Surface resistivity (test methods and requirements).
 

BS EN 1149-2:1997
—Protective
clothing—Electrostatic properties—Test method for measurement of the electrical resistance through a
material (vertical resistance).
 

BS EN 1718:1999
—Light
conveyor belts—Test method for the measurement of the
electrostatic field generated by a running light conveyor belt.
 

DI-ATTS-80285B:1997
—Engineering
support data (ESD).
 

DI-RELI-80669:1992
—Electrostatic
discharge (ESD) control program flag.
 

DI-RELI-80671:1992
—Handling
procedures for electrostatic discharge (ESD) sensitive items.
 

EIA 471:1980
—Symbol
and label for electrostatic sensitive devices.
 

EIA 541:1988
—Packaging
material standards for ESD-sensitive items.
 

EIA 541:1990
—Packaging
of electronic products for shipment.
 

EIA 545:1989
—Electromechanical
switch test method for electrostatic discharge (ESD).
 

EIA 625
—Handling
electrostatic discharge sensitive (ESDS) devices.
 

EIA-JEP 108
—Distributor
requirements for handling electrostatic discharge sensitive (ESDS) devices.
 

EOS/ESD EP102:1988
—Electrostatic
discharge and electronic equipment: A practical guide for designing to prevent
ESD problems.
 

EOS/ESD EP103:1990
—ESD
program management: A realistic approach to continuous, measurable improvement
in static control.
 

EOS/ESD EP105:1995
—ESD
in silicon integrated circuits.
 

ESD 1:2000
—General
practices for ESD control for MR and GMR heads.
 

IEC 60801-2:1991
—Electromagnetic
compatibility for industrial-process measurement and control equipment—Electrostatic discharge requirements.
 

IEC 61000-4-2:1995
—Electromagnetic
compatibility (EMC)—Part 4: Testing and measurement
techniques—Section 2: Electrostatic discharge immunity
test.
 

IEC 61000-4-2:1999
—Electromagnetic
compatibility (EMC)—Part 4-2: Testing and measurement
techniques—Electrostatic discharge immunity test.
 

IEC 61087:1991
—Guide
for evaluating the discharges from a charged surface.
 

IEC 61340-1:1998
—Electrostatics—Part 1: Guide to the principles of electrostatic phenomena
(IEC/101/35/CD).
 

IEC 61340-2-2TR3:2000
—Electrostatics—Part 2-2: Measurement methods—Measurement of
chargeability.
 

IEC 61340-2-3:2000
—Electrostatics—Part 2-3: Methods of test for determining the resistance and
resistivity of solid planar materials used to avoid electrostatic charge
accumulation.
 

IEC 61340-3-1:1998
—Electrostatics—Part 3-1: Methods for simulation of electrostatic effects—Human body model (HBM)—Component testing
(IEC/101/33/CD).
 

IEC 61340-3-2:1998
—Electrostatics—Part 3-2: Methods for simulation of electrostatic effects—Machine model (MM)—Component testing
(IEC/101/34/CD).
 

IEC 61340-4-1:1995
—Electrostatics—Part 4: Standard test methods for specific applications—Section 1: Electrostatic behavior of floor coverings and installed
floors.
 

IEC 61340-4-3:1999
—Test
method for the characterization of electrostatic protective footwear (IEC
document 101/62/CD).
 

IEC 61340-5-1TR2:1998
—Electrostatics—Part 5-1: Protection of electronic devices from electrostatic
phenomena—General requirements.
 

IEC 61340-5-2TR2:1999
—Electrostatics—Part 5-2: Protection of electronic devices from electrostatic
phenomena—User guide.
 

IEC/PAS 62162:2000
—Field-induced
charged-device model test method for electrostatic discharge withstand
thresholds of microelectronic components.
 

IEC/PAS 62179:2000
—Electrostatic
discharge (ESD) sensitivity testing human body model (HBM).

IEC/PAS 62180:2000—Electrostatic discharge (ESD)
sensitivity testing machine model (MM).
 

IEEE C62.38:1994 (R1999)
—IEEE
guide on electrostatic discharge (ESD)—ESD withstand
capability evaluation methods (for electronic equipment subassemblies).
 

IEEE C62.47:1992
—IEEE
guide on electrostatic discharge (ESD)—Characterization
of the ESD environment.
 

ISO/DIS 10605:2000
—Road
vehicles—Test methods for electrical disturbances from
electrostatic discharge.
 

ISO/TR 10605:1994
—Road
vehicles—Electrical disturbances from electrostatic
discharge.
 

JESD 22-A114-B:2000
—Electrostatic
discharge (ESD) sensitivity testing human body model (HBM).
 

JESD 22-A115-A:1997
—Electrostatic
discharge (ESD) sensitivity testing machine model (MM).
 

JESD 22-C101-A:2000
—Field-induced
charged-device model test method for electrostatic discharge withstand
thresholds of microelectronic components.

MIL-PRF-87893B:1997—Workstation—Electrostatic discharge (ESD) control.
 

QPL-87893-1:1995
—Workstation
electrostatic discharge (ESD) control.
 

RAC SOAR 6:1986
—ESD
control in the manufacturing environment.
 

SAE J551/15:1995
—Vehicle
electromagnetic immunity—Electrostatic discharge (ESD).

 

来源:萍乡市盾斯特科技有限公司
产品名
价格